Our Products |
|
Contact us |
Website: |
www.jidesignschicago.com |
Address: |
Beiyuan industrial Yard.
Wangbei Distract.Shiqiao Country.
New Technical Zone.
Zibo City.Shandong.China |
Tel: |
(+86)533-3912988
15153311808 |
Fax: |
(+86)533-3915315 |
Contactor: |
Philip,Mr.Li |
Email: |
joysonma@hotmail.com |
Post Code: |
255000 |
|
|
 |
|
|
|
|
 |
 |

|
|
|
The products are featured by high hardness, big density, low wear lost, good nomalization, good corrosion-resistance, etc. High performance abrasion resistance lining brick is one of our main products by the advanced technology with the perfect character in the abrasion resistance, external appearance , complete specification and easier application.They are the most ideal high-efficient grinding media for milling glaze material, boby material and various powdered ore. The are very popular in spain, Italy, Turkey, Brazil and other places.
Application: Our products are widely used in ceramics, cements,paints, refractories, inorganic mineral powders, chemicals and many other industries.
Performance Index:
Performance Index |
75 Series |
85 Series |
90 Series |
92 Series |
95 Series |
Al2O3(﹪) |
≥75 |
≥85 |
≥90 |
≥92 |
≥95 |
Fe2O3(﹪) |
≤0.5 |
≤0.2 |
≤0.01 |
≤0.01 |
≤0.01 |
Moh’s Hardness |
8 |
8 |
9 |
9 |
9 |
Water Absorption Rate(﹪) |
≤0.02 |
≤0.02 |
≤0.02 |
≤0.02 |
≤0.02 |
Density (g/cm3) |
≥3.27 |
≥3.50 |
≥3.55 |
≥3.60 |
≥3.65 |
Wearing Lost(﹪) |
≤0.20 |
≤0.20 |
≤0.20 |
≤0.15 |
≤0.10 |
Specification:
|
Products |
Length(mm) |
Width(W1)(mm) |
Width(W2)(mm) |
Height(H)(mm) |
40-90MM
Lining Brick |
Rectangle brick |
150±2 |
50±1 |
50±1 |
40/50/60/70/77/90±1 |
Trapezoid brick |
150±2 |
50±1 |
45±1 |
40/50/60/70/77/90±1 |
Rectangle Half brick |
75±1 |
50±1 |
50±1 |
40/50/60/70/77/90±1 |
Trapezoid Half brick |
75±1 |
50±1 |
45±1 |
40/50/60/70/77/90±1 |
Flake Brick |
150±2 |
25±1 |
22.5±1 |
40/50/60/70/77/90±1 |
Special specification Lining Brick |
80×50×55 |
55±2 |
50±1 |
50±1 |
80±1 |
110MM Lining Brick |
75±1 |
45±1 |
41±1 |
110±2 |
110MM Half Lining Brick |
37.5±1 |
45±1 |
41±1 |
110±1 |
Brick for Inlet&Outlet of Miller |
The specification can be made according to the clients’ requirements |
|
|
|
|
|
|
|
|
|